null
CDI Electronics

Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518

(No reviews yet) Write a Review
SKU:
133-4558
UPC:
Does not apply
Shipping:
Calculated at Checkout
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
  • Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 584558 0583395 0778518
$446.75

Description

PRODUCT DESCRIPTION:

Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base 133-4558

133-4558

  • Thousands of parts available: Outboard, PWC, Inboard, I/O, Powerheads, Gearcases, Outdrives. Call or email us with your requests.
  • Aftermarket Johnson Evinrude 60,65 & 70HP 1988-1998 3 Cyl Timer Base without quick start.
Fits:
  • Johnson Evinrude | 60HP | 1988-1988 | TTL, EL, TL, Cross Flow
  • Johnson Evinrude | 60HP | 1990-1990 | TTL
  • Johnson Evinrude | 60HP | 1991-1991 | TTL
  • Johnson Evinrude | 60HP | 1992-1992 | TTL
  • Johnson Evinrude | 65HP | 1989-1990 | Comm Man. Start
  • Johnson Evinrude | 65HP | 1996-1998 | Man. Start
  • Johnson Evinrude | 65HP | 1999-1999 | Man. Start
  • Johnson Evinrude | 65HP | 2001-2001 | Comm Man. Start
  • Johnson Evinrude | 70HP | 1991-1991 | TTL
  • Johnson Evinrude | 70HP | 1992-1992 | TTL

**Product may fit other models not listed here.

Make sure to check your serial numbers and know your motor's model year before ordering:

Important Note On Electrical Parts:
The manufacturer warranty protects you from defects in materials or workmanship but will not cover freight damage, broken solenoids, rust/corrosion/submersion, broken mounting flanges or shafts, cut wires or dismantled units, broken nose housings, units with date codes removed, or any unit showing misuse or altering of any kind. Any defective unit returns will be exchanged with the same part number ONLY. Units returned in working order are subject to a $25 bench test fee and will be returned at buyer's expense. Any part returned with cut wires is subject to a $30 service charge, defective or not.

Please be sure to read and understand all terms and conditions before buying.

View AllClose