Johnson Evinrude 84-1988 150,155,175,185&235HP 35AMP 6Cyl Stator 583274 0583668

PRODUCT DESCRIPTION:

Johnson Evinrude 84-1988 150,155,175,185&235HP 35AMP 6Cyl Stator 173-3668

173-3668

• Thousands of parts available: Outboard, PWC, Inboard, I/O, Powerheads, Gearcases, Outdrives. Call or email us with your requests.
  
• Johnson Evinrude aftermarket 1984-1988 150,155,175,185 & 235HP 35AMP 6 cyl stator cross flow engines without quick start.

• Johnson Evinrude | 150HP | 1984-1984 | Comm, Cross Flow
• Johnson Evinrude | 150HP | 1985-1985 | ST, 35 Amp, Cross Flow
• Johnson Evinrude | 150HP | 1986-1987 | ST, Cross Flow
• Johnson Evinrude | 150HP | 1987-1987 | GT, Cross Flow
• Johnson Evinrude | 150HP | 1988-1988 | ST, 35 Amp, Cross Flow
• Johnson Evinrude | 155HP | 1984-1984 | Comm 35 Amp, Cross Flow
• Johnson Evinrude | 155HP | 1985-1985 | Comm 35 Amp, Cross Flow
• Johnson Evinrude | 155HP | 1986-1987 | Comm 35 Amp, Cross Flow
• Johnson Evinrude | 155HP | 1988-1988 | Comm 35 Amp, Cross Flow
• Johnson Evinrude | 175HP | 1985-1985 | TL, TX, Cross Flow
• Johnson Evinrude | 175HP | 1986-1987 | TL, TX, Cross Flow
• Johnson Evinrude | 175HP | 1988-1988 | ST, TL, TX, Cross Flow
• Johnson Evinrude | 185HP | 1985-1985 | TL, TX, Cross Flow
• Johnson Evinrude | 235HP | 1984-1984 | ST (PORT) 35 Amp, Cross Flow
• Johnson Evinrude | 235HP | 1984-1984 | ST (STBD) 35 Amp, Cross Flow
• Johnson Evinrude | 235HP | 1985-1985 | S, 35 Amp, Cross Flow
• Johnson Evinrude | 235HP | 1985-1985 | TL, TX, Cross Flow
• OMC Sea Drive | 2.5 LHP | 1984-1984
• OMC Sea Drive | 2.5 LHP | 1985-1985
• OMC Sea Drive | 2.6 LHP | 1983-1983 | 1AA/2BA/2BB /35 Amp
• OMC Sea Drive | 2.6 LHP | 1984-1984
• OMC Sea Drive | 2.6 LHP | 1985-1985
• OMC Sea Drive | 2.6 LHP | 1986-1986
• OMC Sea Drive | 2.7 LHP | 1987-1987

**Product may fit other models not listed here.

Make sure to check your serial numbers and know your motor's model year before ordering:

Important Note On Electrical Parts:
The manufacturer warranty protects you from defects in materials or workmanship but will not cover freight damage, broken solenoids, rust/corrosion/submersion, broken mounting flanges or shafts, cut wires or dismantled units, broken nose housings, units with date codes removed, or any unit showing misuse or altering of any kind. Any defective unit returns will be exchanged with the same part number ONLY. Units returned in working order are subject to a $25 bench test fee and will be returned at buyer's expense. Any part returned with cut wires is subject to a $30 service charge, defective or not.

Please be sure to read and understand all terms and conditions before buying.